|
|
External
PI
Y.H.
Sohn, “Advanced Test Reactor –
National Scientific User Facility Program: Low Fluence Behavior of
Metallic Fuels,” US Department of Energy – Idaho National
Laboratory, ID, 2010-Present.
Y.H.
Sohn, “Advanced Materials
Design and Innovative Processing Development,” US Army Research
Laboratory, Aberdeen Proving Ground, 2011-Present.
Y.H.
Sohn, “Microstructural
Characterization of Magnesium Powders and Composites via
Cryomilled Process,” Hart Metals, Tamaqua, OH, 2011-Present.
Y.H.
Sohn, “High Temperature
Diffusion in U-Zr Alloys,” US Department of Energy – Idaho
National Laboratory, ID, 2011-Present.
Y.H.
Sohn,
K.R. Coffey, “Diffusion and Microstructural Evolution of The
Fuel-Cladding Interaction,” US Department of Energy – Idaho
National Laboratory, ID, 2009-Present.
Y.H.
Sohn,
C. Xu and J. Kapat, “Phase-Field Modeling and Experimentation of
Thermotransport in U-Alloys for Transmutation in Fast Reactors,”
US Department of Energy – Idaho National Laboratory, ID,
2008-Present.
Y.H.
Sohn,
K. Coffey “Tracer Diffusion Coefficient Measurement for
Mg-Alloys,” Department of Energy – Oak Ridge National
Laboratory, TN, 2008-Present.
Y.H.
Sohn,
“Diffusion Barrier for U-Mo Nuclear Fuels Cladded with Al
Alloys,” Idaho National Laboratory, ID, Department of Energy
(DOE), 2007-Present.
Y.H.
Sohn,
“Microstructural
Characterization of Superlightweight Nanoengineered Aluminum-based
Composites for Armor Applications,” DWA Composite Company,
Chatsworth, CA, and 2008-2012.
Y.H.
Sohn, “Algal Biofuel for
Aviation: Compatibility in Hot Section Materials and Coatings,”
US Department of Defense – Air Force Research Laboratory
Subcontract through New Mexico State University, Las Cruces,
2010-2011.
Y.H.
Sohn, “Process Dependent Microstructure and Severe Plastic
Deformation in SiCp or Al2O3
Reinforced Aluminum Metal Matrix Composites,” MC-21
Incorporated, Carlson City, NV, 2010-2011.
Y.H.
Sohn,
“Understanding
Severe Plastic Deformation in Mg-Alloys,” Magnesium-Elektron
North American, WI, 2010-2011.
Y.H.
Sohn, “Next Generation Lightweight Metal Matrix Composites,”
Magnesium-Elektron North America, Inc., Madison, IL, 2010-2011.
Y.H.
Sohn, “Effects
of Alloying Additions on the Interdiffusion Behavior of U-Mo
Alloys in Al Matrix,” Idaho National Laboratory, ID, Department
of Energy (DOE), 2006-2010.
Y.H.
Sohn, “Development of Prime
Reliant Thermal Barrier Coatings via Phase Field Modeling and
Experimental Validation,” Florida Center for Advanced
Aero-Propulsion (FCAAP), Tallahassee, FL, 2008-2010.
Y.H.
Sohn,
“Investigation of Precipitation Hardening Process in Copper
Alloys for Rotor Applications,” Siemens Power Generation,
Orlando, FL, and Florida High Tech Corridor, 2009-2010.
Y.H.
Sohn, “Development,
Evaluation and Characterization of Thermal Barrier Coatings for
DGT-5,” Doosan Heavy Industries, Seoul, Korea, 2008-2010.
Y.H.
Sohn,
“Oxide Scale Retention in Steam-Oxidized High Temperature
Alloys,” General Electric Company, Schenectady, New York, 2009 –
2010.
Y.H.
Sohn, K. Scammon,
“Acquisition of Critical Point Drier for Characterization of
Materials in Biology and Medicine,” Neurosurgery and Florida
High Tech Corridor, 2007.
Y.H.
Sohn, P.
Schelling, L. An, L. Zhai, A. Kumar, “Failure Mechanisms, Life
Prediction and Enhanced Performance of Thermal and Environmental
Barrier Coatings,” NASA-Aeronautics Research Mission
Directorate, Washington D.C., 2006-2008.
Y.H.
Sohn,
“Microstructural Characterization of Crack Initiation in Turbine
Engine Components,” Mitsubishi Power Systems, Inc., Orlando, FL
and Florida High Tech Corridor, 2006-2006.
Y.H.
Sohn, L. Zhai. F.
Wei, “Development of Surface Modification Techniques for
Synthesis of Hybrid Tungsten Nano-powders,” Army Research
Laboratory, MD, 2006-2009.
Y.H.
Sohn,
“Microstructural Analysis of Fuel-Dependent Degradation in
Thermal Barrier Coatings,” Siemens Power Generation
Incorporated, Orlando, FL and Florida High Tech Corridor,
2006-2007.
Y.H.
Sohn, V.H. Desai,
“Degradation of Thermal Barrier Coatings with Syngas Combustion:
Testing by Hyperbaric Advanced Development Environmental Simulator
and Characterization by Advanced Electron Microscopy,”
University Turbine Systems Research (UTSR), Department of Energy
(DOE), 2005-2008.
Y.H.
Sohn, “CAREER:
Fundamentals of Multicomponent Diffusion in Multiphase Alloys –
Advances in Phenomenological Descriptions and Experimental
Techniques,” Division of Materials Research, National Science
Foundation (NSF), Arlington, VA, 2003-2008.
Y.H.
Sohn, “Failure
Mechanisms in Furnace-Cycle and Syngas Tested Thermal Barrier
Coatings by Using Photoluminescence and Electron Microscopy,”
Siemens-Westinghouse Power Corporation, Orlando, FL and Florida
High Tech Corridor, 2005-2006.
Y.H.
Sohn, “Processing
and Performance Evaluation of Thermal Barrier Coatings,”
Siemens-Westinghouse Power Corporation, Orlando, FL and Florida
High Tech Corridor, 2005-2006.
Y.H.
Sohn, “Assessment
and Failure Analysis of Spring Clips, Deflector and Sleeve of
Turbine Components,” Mitsubishi Power Systems, Inc., Orlando,
FL, 2005-2006.
Y.H.
Sohn, “Fatigue
Failure Analysis of Spindle Bolt,” Siemens-Westinghouse Power
Corporation, Orlando, FL, 2005-2006.
Y.H.
Sohn, “Development
of Thermal Wave Imaging as a Non-Destructive Evaluation Technique
for Thermal Barrier Coatings,” Solar Turbines Incorporated, San
Diego, CA 92186-5376, 2004-2005.
Y.H.
Sohn, “Reaction
Characterization of High Temperature Materials by Differential
Scanning Calorimetry,” Lockheed Martin Missiles and Fire
Control, Orlando, FL, 32819-8907, 2004-2005.
Y.H.
Sohn, “Assessment
of Diffusional Interactions in Ni-Cr-Al System with Ta and W
Additions for Development of Durable Coatings,”
Siemens-Westinghouse Power Corporation, Orlando, FL and Florida
High Tech Corridor, 2004-2005.
Y.H.
Sohn, “ZFP
Based Design of Oxidation and Hot-Corrosion Resistant Stand-Alone
Metallic Coatings and Bond Coats for Thermal Barrier Coatings,”
Embryonic Technology Program, Siemens-Westinghouse Power
Corporation, Orlando, FL and Florida High Tech Corridor,
2003-2004.
Y.H.
Sohn, R.R.
Vanfleet, L.A. Giannuzzi, “Scanning – High Resolution
Transmission Electron Microscopy of Thermal Barrier Coatings as a
Function of Bondcoat Compositions,” Siemens-Westinghouse Power
Corporation, Orlando, FL and Florida High Tech Corridor,
2002-2003.
Y.H.
Sohn, V.H. Desai
and L.A. Giannuzzi, “Assessment of Failure Mechanisms for
Thermal Barrier Coatings by Photoluminescence, Electrochemical
Impedance and Focused Ion Beam,” University Turbine Systems
Research (UTSR) Administered by Clemson University, Department of
Energy (DOE) – National Energy Technology Laboratory (NETL),
2002-2005.
Y.H.
Sohn and R.R.
Vanfleet, “Microstructural Characterization of Next-Generation
Thermal Barrier Coatings,” Siemens-Westinghouse Power
Corporation, Orlando, FL and Florida High Tech Corridor,
2001-2002.
Y.H.
Sohn and L.A.
Giannuzzi, “Microstructural Analysis of Hypoeutectic Al-Si
Alloys Using Focused Ion Beam and Transmission Electron
Microscopy”, Worcester Polytechnic Institute, Worcester, MA,
2001.
Y.H.
Sohn, “Isothermal
Oxidation and Phase Transformation of Aluminized CMSX-4 Single
Crystal Superalloys,” Solar Turbines Incorporated, San Diego, CA
92186-5376, 2001-2002.
Y.H.
Sohn, “Evaluation
of Interdiffusion Coefficients from Combinatorial-Rapid Alloy
Assessment Method,” Corporate Research and Development (GE-CRD),
General Electric Company, Schenectady, NY 12301, 2001.
Y.
H. Sohn and S.
Jha, “Development of Alumina Coatings for Extending the Life of
Thermal Barrier Coatings,” Surmet Corporation, Burlington, MA,
2001-2002.
External
Co-PI
A.
Gordon, Y.H.
Sohn,
“Thermomechanical Behavior of Metal-Matrix Composites,” MC-21
Incorporated, Carson City, Nevada, 2009 – 2010.
S.
Seal, Y.H. Sohn,
V.H. Desai, “Acquisition of F4 and 7MB Thermal Spray Gun and
DPV, AccuraSpray Software for Coatings Research”,
Siemens-Westinghouse Power Corporation, Orlando, FL, 2005;
Presidential Initiative to Fund Major Research Equipment,
University of Central Florida, 2005-2006.
R.G.
Sellar and Y.H.
Sohn, “Remote
Sensing Technologies for Location of Gas Leaks, Phase II”, NASA
Kennedy Space Center (KSC), FL 32899, 2001-2002.
M.
Gell, E. Jordan and Y.H.
Sohn, “Thermal
Barrier Coatings and Metallic Coatings with Improved Durability”,
High Efficiency Turbine Technology (HEET) University Turbine
Systems Research (UTSR) Administered by Clemson University,
Department of Energy (DOE) – National Energy Technology
Laboratory (NETL), 2001-2004.
Internal
PI:
Y.H.
Sohn,
“Undergraduate Research Initiative: Multicomponent
Interdiffusion – Experiments and Phase-Field Modeling,”
University of Central Florida, 2002-2003.
Y.H.
Sohn, D.
Chakrabarti, H. Heinrich, J. Hickman, J. Pearson, Q. Huo, S.
Khondaker, “Acquisition of Transmission Electron Microscope for
Polymeric and Biological Studies at Nano Scale,” Presidential
Initiative to Fund Major Research Equipment, University of Central
Florida, 2006.
Y.H.
Sohn, H.J. Cho,
“Acquisition of Laser Scanning Confocal Microscope for Research
in Advanced Materials, MEMS, Biomolecular Science and
Nanotechnology,” Presidential Initiative to Fund Major Research
Equipment, University of Central Florida, 2006.
Y.H.
Sohn,
“Acquisition of Major Equipment Cluster for Investigations in
Multicomponent-Multiphase Diffusion with Applications in High
Temperature Coatings,” Presidential Initiative to Fund Major
Research Equipment, University of Central Florida, 2003.
Y.H.
Sohn,
“Undergraduate Research Initiative: Thermal Barrier Coatings,”
University of Central Florida, 2002-2003.
Y.H.
Sohn,
“Simultaneous Differential Scanning Calorimeter (DSC) and
Thermal Gravimetric Analyzer (TGA) for High Temperature Oxidation
Studies”, Presidential Initiative to Fund Major Research
Equipment, University of Central Florida, 2002.
Y.H.
Sohn, “Failure
Characteristics and Mechanisms of Thermal Barrier Coatings”,
In-House Research Grant, University of Central Florida, 2001-2002.
Y.H.
Sohn,
“Development of Photostimulated Luminescence Piezo-Spectroscopy
for Oxidation Resistant High Temperature Coatings”, Presidential
Initiative to Fund Major Research Equipment, University of Central
Florida, 2001.
Internal
Co-PI
M.A.
Dayananda and Y.H.
Sohn,
“Interdiffusion and Microstructural Stability of Fe-Ni-Al Alloys
Containing Ordered Intermetallic Phases”, Purdue Research
Foundation, Purdue University, West Lafayette, Indiana, 1995.
Many
from The University of Central Florida Including Presidential
Major Equipment Award, In-House Research Grant, Florida High Tech
Corridor Programs.
|
